| Under floor heating is much like a central heating | | | | a bit expensive than the radiator, yet it will prove |
| system for indoor climate control. The rooms can | | | | to be beneficial and cost effective in the long run. |
| be kept warm by supplying heated water by | | | | It saves energy up to 40% as compared to |
| electric cable, mesh or film heaters. Not only | | | | other forms of heating for floors. The loops for |
| water but also electric current is used for heating | | | | heating under-floor are absolutely |
| the floors. In the Roman era, heated air was used | | | | maintenance-free and the pipes have longevity of |
| for the purpose of heating. This is generally | | | | 100 years. However, pumps and other controlling |
| common in the cold countries, where it becomes | | | | elements need maintenance from time to time. |
| necessary to heat the floors to keep the rooms | | | | Electrical under-floor heating is very popularly used |
| warm and cosy. | | | | as it is very easy to install and has low cost. For |
| Pipes and tubes are laid on the floor during | | | | comfort in the bathroom from the cold tiles, this |
| construction and warm water is made to circulate | | | | type of heating is used. It is also used in kitchens, |
| through them. The pipes which are generally used | | | | kid's playroom, and basement or in other rooms |
| for this purpose are PEX, alupex and polybutylene. | | | | that need more heat. |
| The thickness of the pipes varies from location to | | | | In case of this type of electrical heating, floor |
| location. There are various companies which make | | | | height need not be very high. 1mm height is |
| pipes for floor heating. For the under-floor heating | | | | enough for this type of heating. With the help of |
| systems, oil, gas, solid fuel or electric resistance | | | | thermostat, the heating program can be |
| hot water boilers can be used for providing heat. | | | | scheduled according to the time when it is |
| There are several thermal concerns for the | | | | occupied. The electric wires are set up onto an |
| heating of the under floor. Downward heat loss is | | | | insulation board or directly onto the sub floor and |
| influenced by the sol conductivities. Isolated | | | | then the floor is covered over the heating |
| heating surfaces can result from air conditioned | | | | system or thin set. |
| systems and ventilation. For the heating of the | | | | There are various advantages and disadvantages |
| under floor, various factors need to be controlled. | | | | of heating under floor. The advantages include |
| These are fluid temperature in heating plant, fluid | | | | thermal comfort, dust control, space saving, low |
| temperature in pex piping system, fluid | | | | temperature and energy efficiency. There are |
| temperature in distributing network, and surface | | | | some disadvantages to this system as well, which |
| temperature for safety and comfort. | | | | are electric heat inefficiency, maintenance and |
| Though the system of heating under floor can be | | | | repair and compatibility. |