The Heater that Heats My Home

The first heating bill I received when heating myfrom the stove pipe which was mounted to the
home with electric heat was a shocking $300.00bottom of the box and the chimney. The heater
for less than 2 months. The weather had notwas tipped back a little and the stove pipe was
been bitterly cold, so there is no way I couldsqueezed into the collar hole, coming out of the
continue to heat my home using electricity.center of the heater. Again every thing was
While visiting a local hardware store I got an idea.squared up and checked for level. Before the
I would try the most economical and basic formworkmen left, I used some wood pieces I had
of heating system possible. I would have a woodstored for that purpose and lit a small fire in the
heater installed in my entrance room. There washeater to test it out. Through the window in the
a cute little heater, available for $500.00. Theheater's door one could see the fire burning
store manager agreed to deliver the heater, somerrily along. The heater gave off that new, not
that took care of the transportation problem. Iyet broken in smell, as the first heat released
checked with a furnace servicing company whowhatever the factory had applied to the metal
also installed heating systems, and got ansurfaces of the heater. That smell dissipated after
estimate for installing the heater. The heater wasa few moments. There were no smoke leaks and
delivered without any hassle.everything looked like it was working well.
A few days later the furnace installation peopleThe heater is designed to be super efficient.
came to install my new heater. Having checkedThere is a chamber above the fire box where
on where I wanted to have it installed in thethe smoke is mixed with oxygenated air to allow
room, they first laid down a metal covered pieceany wood gasses to be reburned. This also has
of plywood about 3 feet square. This was tothe effect of reducing the amount of smoke
protect the floor against extreme heat and fireemissions expelled by the heater. When the fire
damage. They squared it all up and positioned thehas started burning properly, and is producing
heater on top of the metal floor protector base.heat, you can see the distortion of heat in the air
They measured and calculated where to makecoming from the chimney, but no smoke.
the hole in the ceiling and roof for the stove pipe,During the 7 years I have used the wood heater,
coupling box, and chimney to go through. Thenit has paid for itself several times over, compared
the sawing began. It didn't take long before thereto what I would have spent on electricity over
was a hole in the roof, and ceiling through whichthat time. The bonus is, I have dependable heat,
the base of a metal chimney was poking.even if there is a power black out. The nice part
A heat dissipation, coupling box was mounted inis, that wood heat gives off a special rosy
the ceiling and connected to the chimney. Thiswarmth, a comfortable homey sort of heat, that
device would spread out and radiate the heatcannot be surpassed.